zimo.guru

Hello,
I tested MS450 decoder and its behavior is different from MX645.

Example A:
#442=150 (128+22), #443=0, #444=4, #445=0, #446=4, #447=0

Pressed function keys : outputs that are switched ON on MX645 / on MS450
no key : FO4 / -
F22: - / -

Example B:
#442=21, #443=0, #444=2, #445=0, #446=2, #447=0
#448=150 (128+22), #449=21, #450=4, #451=0, #452=4, #453=0

Pressed function keys : outputs that are switched ON on MX645 / on MS450
no key : FO4 / -
F21 : FO4 / FO2
F21 & F22 : FO2 / FO2
F22 : - / -

Example C:
#33=1
#442=21, #443=157 (128+29), #444=2, #445=0, #446=2, #447=0
#448=22, #449=149 (128+21), #450=4, #451=0, #452=4, #453=0

Pressed function keys : outputs that are switched ON on MX645 / on MS450
F0 : FOf / FOf
F0 & F21 : FO2 / FO2
F0 & F21 & F22 : FO4 / FO2 & FO4


It does not work properly with the MS450 decoder:

1. Bit = 1: Inverts the F-key function (#430 or #442 or # 448)

2. in example C: FO2 is not turned off after pressing F22

Thank you

rott

Dear Mr. rott!

Which software version is loaded in Your decoders?

Hello,

I tested version 4.97 and 4.107.

This weekend I upgraded to version 4.202 and this version works properly.

Best regards

rott

Dear Mr. rott!

ok.
Thank You for Your response.